Can We Rationally Design and Operate Spatial Atomic Layer Deposition Systems for Steering the Growth Regime of Thin Films?

Fine control over the growth of materials is required to precisely tailor their properties. Spatial atomic layer deposition (SALD) is a thin-film deposition technique that has recently attracted attention because it allows producing thin films with a precise number of deposited layers, while being vacuum-free and much faster than conventional atomic layer deposition. SALD can be used to grow films in the atomic layer deposition or chemical vapor deposition regimes, depending on the extent of precursor intermixing. Precursor intermixing is strongly influenced by the SALD head design and operating conditions, both of which affect film growth in complex ways, making it difficult to predict the growth regime prior to depositions. Here, we used numerical simulation to systematically study how to rationally design and operate SALD systems for growing thin films in different growth regimes. We developed design maps and a predictive equation allowing us to predict the growth regime as a function of the design parameters and operation conditions. The predicted growth regimes match those observed in depositions performed for various conditions. The developed design maps and predictive equation empower researchers in designing, operating, and optimizing SALD systems, while offering a convenient way to screen deposition parameters, prior to experimentation.

The HEAT-SHIELD project - Perspectives from an inter-sectoral approach to occupational heat stress.

OBJECTIVES: To provide perspectives from the HEAT-SHIELD project (www.heat-shield.eu): a multi-national, inter-sectoral, and cross-disciplinary initiative, incorporating twenty European research institutions, as well as occupational health and industrial partners, on solutions to combat negative health and productivity effects caused by working on a warmer world. METHODS: In this invited review, we focus on the theoretical and methodological advancements developed to combat occupational heat stress during the last five years of operation. RESULTS: We outline how we created climate forecast models to incorporate humidity, wind and solar radiation to the traditional temperature-based climate projections, providing the basis for timely, policy-relevant, industry-specific and individualized information. Further, we summarise the industry-specific guidelines we developed regarding technical and biophysical cooling solutions considering effectiveness, cost, sustainability, and the practical implementation potential in outdoor and indoor settings, in addition to field-testing of selected solutions with time-motion analyses and biophysical evaluations. All recommendations were adjusted following feedback from workshops with employers, employees, safety officers, and adjacent stakeholders such as local or national health policy makers. The cross-scientific approach was also used for providing policy-relevant information based on socioeconomic analyses and identification of vulnerable regions considered to be more relevant for political actions than average continental recommendations and interventions. DISCUSSION: From the HEAT-SHIELD experiences developed within European settings, we discuss how this inter-sectoral approach may be adopted or translated into actionable knowledge across continents where workers and societies are affected by escalating environmental temperatures.

Localised boundary air layer and clothing evaporative resistances for individual body segments.

Evaporative resistance is an important parameter to characterise clothing thermal comfort. However, previous work has focused mainly on either total static or dynamic evaporative resistance. There is a lack of investigation of localised clothing evaporative resistance. The objective of this study was to study localised evaporative resistance using sweating thermal manikins. The individual and interaction effects of air and body movements on localised resultant evaporative resistance were examined in a strict protocol. The boundary air layer's localised evaporative resistance was investigated on nude sweating manikins at three different air velocity levels (0.18, 0.48 and 0.78 m/s) and three different walking speeds (0, 0.96 and 1.17 m/s). Similarly, localised clothing evaporative resistance was measured on sweating manikins at three different air velocities (0.13, 0.48 and 0.70 m/s) and three walking speeds (0, 0.96 and 1.17 m/s). Results showed that the wind speed has distinct effects on local body segments. In contrast, walking speed brought much more effect on the limbs, such as thigh and forearm, than on body torso, such as back and waist. In addition, the combined effect of body and air movement on localised evaporative resistance demonstrated that the walking effect has more influence on the extremities than on the torso. Therefore, localised evaporative resistance values should be provided when reporting test results in order to clearly describe clothing local moisture transfer characteristics. PRACTITIONER SUMMARY: Localised boundary air layer and clothing evaporative resistances are essential data for clothing design and assessment of thermal comfort. A comprehensive understanding of the effects of air and body movement on localised evaporative resistance is also necessary by both textile and apparel researchers and industry.